Sagem RT3000 - 20 Connection Sockets

Connection sockets
SAGEM RT3000 119
Datei 8115AD002-Total.doc
Datei gespeichert 24.04.04 13:23 von EDV/ORGA
Druckzeit 24.04.04, 18:17
Status Release
20 Connection sockets
RJ12 “PHONE” socket
1 2 3 4 5 6
Pin 3: LA
Pin 4: LB
The other pins are not used.
RJ12 “FAX/MODEM/PHONE” socket
1 2 3 4 5 6
Pin 3: LA
Pin 4: LB
The other pins are not used.
USB Interface
Pin Signal
1 +5 V
2 USBP0- [USBP1-]
3 USBP0+ [USBP1+]
4 GND (ground)
Serial interface DB-9-F
5 4 3 2 1
9 8 7 6
Pin ITU-T DIN EIA USA Designation
1 109 M5 CF DCD Carrier Detect
2 104 D2 BB RXD Received Data
3 103 C1 BA TXD Transmitted Data
4 108.2 S1.2 CD DTR Device Ready
5 102 E2 AB GND Operating Ground
6 107 M1 CC DSR Modem Ready
7 105 S2 CA RTS Request To Send
8 106 M2 CB CTS Modem Ready to Send
9 125 M3 CE RI Incoming Call
The serial interface is operated at a data rate of 57600 bps.
The data format is 8-N-1 (8 data bits, no parity bit, 1 stop bit).