Sagem RT3000 - Call Forwarding Unconditional (CFU)

Configuration
SAGEM RT3000 25
Datei 8115AD002-Total.doc
Datei gespeichert 24.04.04 13:23 von EDV/ORGA
Druckzeit 24.04.04, 18:17
Status Release
hook on the handset.
ACCESS
means: access code; by default it is
000000
8.3.1 Call forwarding unconditional (CFU)
If call forwarding unconditional is activated incoming calls will be forwarded to the
configured telephone number. You can configure this for each type of call (voice, data,
fax) independently.
To change the setting enter the following sequence:
Description:
**21*
<Telnumber>
#
Activates for all call types
**21*
<Telnumber>
*
<call_type>
#
Activates for selected call
types (see below)
##21#
Deactivates call forwarding
unconditional
*#21#
Status Checking (see p. 30)
Meaning:
<Telnumber> = the telephone number, the call will be forwarded to
<call_type> =
11
: Incoming phone calls will be forwarded.
<call_type> =
13
: Incoming fax calls will be forwarded.
<call_type> =
25
: Incoming data calls will be forwarded.
Both prefix commands
*
and
**
are supported to activate the service.
Both prefix commands
#
and
##
are supported to deactivate the service.