Sagem RT3000 - SMS Configuration Settings

Configuration
SAGEM RT3000 33
Datei 8115AD002-Total.doc
Datei gespeichert 24.04.04 13:23 von EDV/ORGA
Druckzeit 24.04.04, 18:17
Status Release
8.6 SMS Configuration
8.6.1 Select port to receive SMS
You can enter or read a SMS message either by AT commands through the PC port or
by using a telephone, being capable of fixed network SMS. You need to select the port,
where the SMS is delivered to. To change the setting enter the following sequence:
Description:
*
5
A
CCESS
0
19
0
1
#
Receive SMS on the
Phone port (fixed
network SMS)
*
5
A
CCESS
0
19
0
2
#
Receive SMS on the
Fax/Modem/Phone port
(fixed network SMS)
*
5
A
CCESS
0
19
0
3
#
Receive SMS on the PC-
port (Default)
8.6.2 Configuration for fixed network SMS protocol 1
If your telephone supports fixed network SMS protocol 1, please enter the following
sequence:
*
5
A
CCESS
0
27 1
#
Select Fixed net SMS
protocol 1
Your fixed network SMS telephone needs the telephone number of the SMS centre.
Choose any number and configure this number in both, your telephone and the
RT3000.
For the configuration of the RT3000 please enter the sequence below:
*
5
A
CCESS
0
24
<SMS_
Center>
#
Enter the number of the
SMS centre for fixed
network SMS (Send /
Receive)
Meaning:
<SMS_Center> = the telephone number of the fixed network SMS centre
Default access code:
000000
Default access code:
000000
Default access code:
000000