Sagem RT3000 - AT Command Interface (SIM APPLICATION TOOLKIT)

For experienced Users: AT commands
SAGEM RT3000 73
Datei 8115AD002-Total.doc
Datei gespeichert 24.04.04 13:23 von EDV/ORGA
Druckzeit 24.04.04, 18:17
Status Release
AT+CSMP – Setting the text mode parameters:
AT+CSMP=[<fo>[,<vp>[,<pid>[,dcs] ] ] ]
Sets the parameters
AT+CSMP?
Calls up the current settings
AT+CSMP=?
Response “OK”
Values for:
<fo>
17
Values for:
<vp>
Message storage time in the SMS Center
71
6 hours
167
24 hours
173
7 days
255
63 weeks
Value for:
<pid>
0
Value for: <dcs>
0
14.2.2 AT Command Interface (SIM APPLICATION TOOLKIT)
SIMTOOLKIT
+KSTC See below
+KSTE See below
+KSTER See below
+KSTF See below
+KSTIA See below
+KSTIR See below
+KSTIS See below
+KSTP See below
+KSTR See below
+KSTV See below
In addition to the listed AT commands, in this operating mode the GSM-Adapter
recognises, accepts and acknowledges a series of AT commands which are, however,
not executed. These commands are:
ATL
n
, ATM
n
,
ATXn, ATP, ATT