Sagem RT3000 - Page 75

For experienced Users: AT commands
74 SAGEM RT3000
Datei 8115AD002-Total.doc
Datei gespeichert 24.04.04 13:23 von EDV/ORGA
Druckzeit 24.04.04, 18:17
Status Release
AT+KSTC – SIM Application toolkit command
AT+KSTC:<type>,<TLVs>
Generic notification used by the module to
indicate a proactive command to the DTE
Values for:
<type>
0
Debug (no response awaited by the
module, no action required by DTE)
1
action (response awaited by the module)
2
Information 1 (response awaited by the
module)
The module will send a +KSTE notification
to indicate the command end
3
Information 2 (no response awaited by
DTE)
4
Information 3 (response awaited by DTE)
<TLVs>
TLVs in HEX format
AT+KSTE – End of a toolkit command
AT+KSTE:<TLVs>
Notification
Values for:
<TLVs>
TLVs in HEX format
AT+KSTER – Response to an envelope command
AT+KSTER:<TLVs>
Notification
Values for:
<TLVs>
TLVs in HEX format
AT+KSTF – Type error
AT+KSTF:<type>,<details> Is sent to the module when a command
has been received with an incorrect or
unmanageable type.
Response: OK
Values for:
<type> Type of command received as the payload
of the unsolicited code +KSTC
<details> Command details in HEX format