Sagem RT3000 - Additional Configuration Settings

Configuration
SAGEM RT3000 35
Datei 8115AD002-Total.doc
Datei gespeichert 24.04.04 13:23 von EDV/ORGA
Druckzeit 24.04.04, 18:17
Status Release
Example:
You have entered the SMS-TX number 900716800 in your telecomm equipment, or this
number has already been configured by factory setting. Please enter the same number
in the RT3000 as SMS centre number:
*
5
A
CCESS
0
24 900716800
#
You have entered the SMS-RX number 90071680 in your telecomm equipment, or this
number has already been configured by factory setting. Please enter the same number
in the RT3000 as local number::
*
5
A
CCESS
0
26 90071680
#
8.6.4 Enable/Disable error report
If the SAGEM RT3000 cannot deliver a SMS to the remote station, there it can send an
error report to the telecomms equipment you have used to send the SMS. You can
activate or deactivate this function.
*
5
A
CCESS
0
25 0
#
Deactivate error report
*
5
A
CCESS
0
25 1
#
Activate the error report
Default access code:
000000