Sagem RT3000 - Page 117

Configuration of Tones
116 SAGEM RT3000
Datei 8115AD002-Total.doc
Datei gespeichert 24.04.04 13:23 von EDV/ORGA
Druckzeit 24.04.04, 18:17
Status Release
;level range -> 0dB <-> -30 dB
CHA_TONE_LEVEL=0
CHB_TONE_LEVEL=0
[TIMINGS]
;#index0=on, index1=off, index2=on, index3=off...
;timing-sequence-terminators: -100 -> end of sequence; -2 -> 2 steps
back; -4 -> 4 steps back ...
;settings for channel a
CHA_RING=100,400,-2
CHA_DIAL=100,0,-2
CHA_CALL_CTRL=150,350,-2
CHA_BUSY=50,50,-2
CHA_CALLWAIT=40,800,16,16,16,-4
CHA_ACPT_PROG=10,10,-100
CHA_NON_ACPT_PROG=10,50,10,50,-100
CHA_LAST_PIN=50,50,10,50,-4
CHA_MISS_SIM=10,50,-2
;settings for channel b
CHB_RING=100,400,-2
CHB_DIAL=100,0,-2
CHB_CALL_CTRL=150,350,-2
CHB_BUSY=50,50,-2
CHB_CALLWAIT=40,800,16,16,16,-4
CHB_ACPT_PROG=10,10,-100
CHB_NON_ACPT_PROG=10,50,10,50,-100
CHB_LAST_PIN=50,50,10,50,-4
CHB_MISS_SIM=10,50,-2
[GENERAL]
VERSION_TONE_INI=1.018