Operation: Send and receive fixed network SMS
SAGEM RT3000 21
Datei 8115AD002-Total.doc
Datei gespeichert 24.04.04 13:23 von EDV/ORGA
Druckzeit 24.04.04, 18:17
Status Release
Receiving a SMS
When the Sagem RT3000 detects an incoming SMS it will give
notice to the device that is connected to its configured SMS-port
(see Select port to receive SMS, page 33), so that this device will
ring, receive the SMS and display it.
When the Sagem RT3000 is not successful to transfer the SMS it
will retry to repeat the transmission 2 times.
If the Sagem RT3000 is still not successful to transfer the SMS
after these retrials, the user can invoke a retransmission when his
device is ready.
To do this enter the following sequence:
Description:
*10#
After you have entered the code, the SAGEM
RT3000 will restart the transmission.
means: wait for the confirmation tone (up to 3 sec):
a high pitched beep signals: OK
a low frequency beep-beep signals: Wrong entry.
To Next Page
Loading...