Sagem RT3000 - Page 49

Installing the RT3000 modem driver on a Windows-PC
48 SAGEM RT3000
Datei 8115AD002-Total.doc
Datei gespeichert 24.04.04 13:23 von EDV/ORGA
Druckzeit 24.04.04, 18:17
Status Release
You want to connect the SAGEM RT3000
• to an USB plug of your computer, then install #
1. the USB driver (page 39)
2. the modem driver
• to a COM port of your computer, then install #
only the modem driver
Installing the
modem driver of
the SAGEM
RT3000
The following instructions show dialogues that are displayed when
doing the installation process on a computer running the operating
system Windows XP. If you have another Windows version (2000,
ME, 98SE) do the appropriate steps.
Using Windows 2000 or Windows XP you must be logged in as
Administrator.
Follow the instructions below and those on the screen:
1. Insert the provided CD-ROM into the CD-ROM drive of your
computer.
2.
Click Start, Control Panel
Result:
The Control Panel dialog appears. Choose Classic View.
Double-click on Phone and Modem...
3.
Result: The dialog Phone nad Modem Options is displayed.
On the Modems card click Add....
Example:
No modem
driver is installed