For experienced Users: AT commands
70 SAGEM RT3000
Datei 8115AD002-Total.doc
Datei gespeichert 24.04.04 13:23 von EDV/ORGA
Druckzeit 24.04.04, 18:17
Status Release
AT+CMGL – Listing the stored messages:
AT+CMGL[=<stat>]
Lists the messages according to various
characteristics
AT+CMGL=?
Shows the message display options
supported
Values for:
<stat>
Message status
0
„REC UNREAD“
(Messages received but unread)
1
„REC READ“
(Messages received and read)
2
„STO UNSENT“
(Messages stored but not sent)
3
„STO SENT“
(Messages stored and sent)
4
„ALL“
(All types of message)
AT+CMGR – reading a message:
AT+CMGR=<index>
Reads the message
Values for:
<index>
Message storage location
1 – 10
Message storage location on SIM,
n depends on SIM card capacity
AT+CMGS – Sending a message
Text Mode activated (AT+CMGF=1)
AT+CMGS=<da><CR> <Txt> <CTRL Z>
Sends the message
Value for:
<da>
“Recipient's telephone number”
Value for:
<Txt>
The text to be sent
AT+CMGS – Sending a message:
PDU mode activated(AT+CMGF=0)
AT+CMGS=<length><CR>
coded PDU text <CTRL Z>
Sends the message
Value for:
<length>
No. of PDU characters
AT+CMGW – Writing a message into memory:
Text Mode activated (AT+CMGF=1)
AT+CMGW=<oa/da><CR> <Txt> <CTRL Z>
Writes the message into the memory
Value for:
<oa/da>
“Recipient's telephone number”
Value for:
<Txt>
The text to be sent
To Next Page
Loading...