Sagem RT3000 - Page 85

Configuration methods
84 SAGEM RT3000
Datei 8115AD002-Total.doc
Datei gespeichert 24.04.04 13:23 von EDV/ORGA
Druckzeit 24.04.04, 18:17
Status Release
FTP program:
IP number: 192.168.0.8
User name: service
Password: service
Download from:
Remote PC:
Make a CSD (Circuit Switched Data) connection - that means
normal dial-up connection - to the SAGEM RT3000.
Dial Up Network:
Dial string: Telephone number (Data)
User name: service
Password: service
FTP program:
IP number: 192.168.0.8
User name: service
Password: service
2.
Edit the file para.ini with a text editor (plain text!). See
Parameters in the file para.ini: advanced configuration, page
85.
3.
Upload the para.ini file using the FTP program.
Use the same connection as for downloading.
!
For service connections from remote computers the telephone numbers of those
stations have to be set in the para.ini and the calls have to signal their own
telephone numbers (CLIR deactivated). So the SAGEM RT3000 can check if the
calling station is allowed to configure by comparing the signalled telephone number
with the numbers in the para.ini.
(see Settings for the configuration access via SMS and FTP, page 85)
Example:
[REMOTE_ACCESS]
SERVICE_CLIP_4=+4940553045830
Telephone
number