Sam4s ER-265 - Clerk Report

SAM4s ER-265 Operator's and Programming Manual v1.14 Contents  103
Clerk Report
If you are using a clerk system, the clerk report is available. (See “System Option Programming”
on page 60 and set option #16 to a value of 1 or 2 if you wish to use the clerk system.)
Report Name ->
Report Type/Reset (Z) Counter
Total sales for the clerk ->
Number of no sales performed ->
Customer Count for the clerk ->
(Totals are listed
for each CLERK)
Total count of all No Sales ->
Total count of all customers ->
Date/Time ->
Transaction Counter/Clerk/Register Number ->
THANK-YOU
CALL AGAIN
 CLERK REPORT >
X 1
CLERK 1 $1.06
NO SALE CNT. 0
CUSTOM. CNT 1
CLERK 2 $7.92
NO SALE CNT. 0
CUSTOM. CNT 9
*****************
NO SALE CNT. 0
CUSTOM. CNT 10
TOTAL $8.98
15:39 03-01-2006
000068 CLERK 1 00