Sam4s ER-265 - Cancel

42  Advanced Operating Instructions SAM4s ER-265 Operator's and Programming Manual v1.14
Cancel
The CANCEL key allows you to stop any transaction. Anything registered within the transaction
before the CANCEL key is pressed is automatically corrected. The CANCEL key may be
inactivated through programming, see “CANCEL Key Programming” on page 73.
1. Register the items you wish to sell.
2. Press the CANCEL key.
CANCEL
THANK-YOU
CALL AGAIN
DEPT.1 T1 $2.29
COUPON -0.50
CANCEL------------------
15:40 03-01-2006
000045 CLERK 1 00
Void Position Operations
You can use the Void control lock position to correct any complete transaction. To correct any
transaction:
1. Turn the control lock to the VOID position.
2. Enter the transaction you wish to correct
exactly as it was entered originally in the
REG control lock position. You can enter
discounts, voids, returns, tax exemptions or
any other function.
3. All totals and counters are corrected as if
the original transaction did not take place.
THANK-YOU
CALL AGAIN
VOID MODE
DEPT 1 T1 -2 29
DEPT 2 -1.00
SUBTOTAL -3.43
TAXABLE1 -2.29
TAX1 AMOUNT -0.14
CASH -3.43
15:40 03-01-2006
000046 CLERK 1 00