Sam4s ER-265 - System Option Table

62  Advanced Programming Instructions SAM4s ER-265 Operator's and Programming Manual v1.14
System Option Table
NOTE: Shaded areas are the default settings, in other words, the shaded area indicates the
way the register is automatically set up.
Option
No.
SYSTEM OPTION STATUS
Print the grand total on X,/Z report. YES = 0
1
NO = 1
Print the gross total on X,/Z report. YES = 0
2
NO = 1
Reset the consecutive number counter after a Z report. NO = 0
3
YES = 1
Reset the Z counter after Z report. NO = 0
4
YES = 1
Skip totals with zero value on X,Z report. YES = 0
5
NO = 1
Reset the grand total after a Z report. NO = 0
6
YES = 1
Print the subtotal when pressed. YES = 0
7
NO = 1
Cash must be declared before X/Z report. NO = 0
8
YES = 1
Allow X reports YES = 0
9
NO = 1
Decimal point position 0 = none
1 = 1 place
2 = 2
places
10
3 = 3
places
Select a method for tax printing:
Print Taxable Totals. Print tax amounts separately. 0
Print Taxable Totals. Print only total of all taxes. 1
Print Taxable Totals. Do not print tax amounts. 2
Do not print Taxable Total. Print tax amounts separately. 3
Do not print Taxable Total. Print only total of all taxes. 4
11
Do not print Taxable Total. Do not print tax amounts. 5