Sam4s ER-265 - Page 63

SAM4s ER-265 Operator's and Programming Manual v1.14 Advanced Programming Instructions  63
Option
No.
SYSTEM OPTION STATUS
Rounding method for Round up at 0.50 0
percentage key and tax. Always Round up 1
12
Always Round down 2
Rounding method for Round up at 0.50 0
multiplication and split Always Round up 1
13
Always Round down 2
Allow Post Tender. NO = 0
14
YES = 1
Allow Check Cashing. NO = 0
15
YES = 1
Select clerk option:
Clerk function inactive. 0
Allow clerk function. Clerk stay down mode. 1
16
Allow clerk function. Clerk pop up mode. 2
Allow receipt after sale. NO = 0
17
YES = 1
Print Currency Symbol:
18
Refer to the “code table” on page 77
Print “.”
Enforce cash or check tender at totaling. NO = 0
19
YES = 1
Date sequence MM-DD-YY 0
DD-MM-YY 1
20
YY-MM-DD 2
Select drawer compulsory NO = 0
21
YES = 1
Use spool NO = 0
22
YES = 1
Electronic Journal Disable. 0
Print EJ from Oldest. 1
23
Electronic Journal Enable
Print EJ from Newest 2
Prompt operator when Electronic Journal is full NO = 0
YES = 1
Stop operations when Electronic journal is full* NO = 0
YES = 2
Send reset report to Electronic journal NO = 0
24
YES = 4
SUM