Sam4s ER-265 - Setting a Register Number

82  Advanced Programming Instructions SAM4s ER-265 Operator's and Programming Manual v1.14
Setting a Register Number
You can program a two digit register number that will print on the lower right corner of each
transaction. If you are using more than one cash register, the register number can be used to
identify the register where the transaction was entered.
15:40 03-02-2006
000081 CLERK 1 99
Register Number
To set a register identification number:
1. Turn the control lock to the PGM position.
2. Enter register number and press the #/NS key:
#/NS
3. Press the CASH/TEND key to end programming.
CASH/
TEND