Sam4s ER-265 - Tendering a Check Sale

28  Quick Setup SAM4s ER-265 Operator's and Programming Manual v1.14
Tendering a Check Sale
1. Register the items you wish to sell.
2. To display and print the subtotal of the sale
including tax, press SUBTOTAL:
SUB
TOTAL
3. Enter the amount of the check tendered by
the customer. For example, for $20.00
enter:
0 0 0 2
4. Press CHECK:
CHECK
5. The display will indicate “C” for change,
the drawer will open and the receipt will
print as in the example on the right.
THANK-YOU
CALL AGAIN
DEPT.1 T1 $2.99
DEPT.1 T1 $2.99
4 X $1.99
DEPT.2 $7.96
SUBTOTAL $14.30
TAXABLE1 $5.98
TAX1 AMOUNT $0.36
TOTAL $14.30
CHECK $20.00
CHANGE $5.70
15:40 03-01-2006
000022 CLERK 1 00
Totaling a Charge Sale
1. Register the items you wish to sell.
2. To display and print the subtotal of the sale
including tax, press SUBTOTAL:
SUB
TOTAL
3. Press CHARGE:
CHARGE
4. The display will indicate “=” for total, the
drawer will open and the receipt will print
as in the example on the right.
Note: Charge tendering is not allowed.
THANK-YOU
CALL AGAIN
DEPT.1 T1 $2.99
DEPT.1 T1 $2.99
4 X $1.99
DEPT.2 $7.96
SUBTOTAL $14.30
TAXABLE1 $5.98
TAX1 AMOUNT $0.36
CHARGE $14.30
15:40 03-01-2006
000023 CLERK 1 00