Sam4s ER-265 - Page 64

64  Advanced Programming Instructions SAM4s ER-265 Operator's and Programming Manual v1.14
Option
No.
SYSTEM OPTION STATUS
Paper End Sensor(Receipt) YES = 0
NO = 1
Paper End Sensor(Journal) YES = 0
25
* 2-Station Model Only NO = 2
SUM
Do Not Print small font for journal printer 0
26
Print small font for EJ REPORT * 1-Staion 1
Overlay descriptor NO = 0
27
YES = 1
Print deep color for printer ( slow feeding ) NO = 0
28
YES = 1
Pre Print graphic logo on receipt? NO = 0
29
YES = 1
Use Kitchen Printer (ELLIX 10) NO = 0
30
YES = 1
31
Ending feeding line on KP (0-9)
4
32
Quick journal review (R-Mode/10 Subtotal) prints last xx (0-99)
lines of electronic journal. (Requires v1.008 software or later.)
0-99
NO = 0
33
**Use French language descriptors?
YES = 1
* Note: Beginning at software version 1.010, the default setting for this address #24 is ‘0’ rather than
‘2’.
** Note: Option #33 is available beginning with software version 1.011