Sam4s ER-265 - Page 84

84  Advanced Programming Instructions SAM4s ER-265 Operator's and Programming Manual v1.14
Logo Programming Example
Program the first line of the logo to say “GENERAL STORE”
1. Turn the control lock to the PGM position.
2. Press the X/TIME key.
3. To center the message on the receipt, enter six space characters: 7 0 7 0 7 0 7 0 7 0
7 0.
4. Enter the codes representing the text “GENERAL STORE”: 2 6 2 4 3 3 2 4 3 7 2 0 3
1 7 0 3 8 3 9 3 4 3 7 2 4.
5. Press the X/TIME key.
6. Enter 1 1, press the CHECK TEND key.
7. Press the CASH/TEND key to end programming.