Samson 3374 Series - Binary Output; Electronic Limit Contact (Binary Output)

6-2 EB 8331-4 EN
Operating controls
6.1.1 Display
Afterswitchingonthesupplyvoltage,thecurrentrmwareisdisplayedfortwoseconds.
Afterwards, the start screen appears.
%
Onstartinguptheactuatorforthersttime,thestartscreenandtheerrorreadingE00 (no initializa-
tion performed) appear in alternating sequence.
Fig.6-2: Start screen after starting up the actuator for the rst time
Start screen
Thestartscreendependsontheselectedapplication(seethe'Start-upandconguration'
section).Onstartinguptheactuatorforthersttimeandafterloadingdefaultsettings,the
positionerapplication(POSI,seeFig.6-2)isautomaticallyselected.