Samson 3374 Series - MAN Mode; Operation Using Memory Pen

EB 8331-4 EN 8-5
Operation
8.2.2 MAN mode
The actuator is normally in automatic mode indicated by the icon (displayed in Code 0 to
3). In MAN mode, the actuator stem moves to the adjusted manual positioning value. An ac-
tive manual mode is indicated in Code 0 by the
icon. The positioning value can be ad-
justed in Code 3.
Code Description WE Adjustment range
2 Operating mode AUTO AUTO (automatic mode)
MAN(manualmode)
3 Positioning value (manual mode) – 0.0to100.0%
8.3 Operation using memory pen
The memory pen is optional (accessories) and is used to store and transfer data:
Fig.8-2: Memory pen-64 (order no. 1400-9753)
ThememorypencanbeconguredinTROVIS-VIEW.Thefollowingfunctionsfortheactuator
can be selected:
− Read data from the memory pen
− Write data to the memory pen
− Time-controlled data logging
− Event-triggered data logging
− Command mode
RefertotheoperatinginstructionsforTROVIS-VIEWfordetailsonhowtocongurethemem-
ory pen:
uEB6661.