OfficeServ 100 Installation Manual/Ed.00
© SAMSUNG Electronics Co., Ltd. 10-25
Program 714 Enter the Conversion Table of Dialing a Station Directly (MCP1)
Entry Digit MOH 1~6 CW Delete Name
001 2*** - B - 0 -
002 5*** - B - 0 -
Program 603 trunk line Group (MCP1)
803 Set VoIP Networking Signaling trunk line
Program 710 Enter a Digit for Auto Route Selection (MCP1)
Index Digit Length LCRT
0001 00 12 2 International call: Sends to the system A
0002 01 10 2 Mobile call: Sends to the system A
0003 02 9 2 Long distance call: Sends to the system A
0004 03 10 2 Local call: Sends to the system A
0005 04 10 2
0006 05 10 2
0007 06 10 2
0008 07 10 2 070 call: sends to the system A
0009 08 10 2 080 call: Sends to the system A
0010 091 7 1 The station call of the system A
0011 092 7 1 The station call of the system B
0012 093 7 1 The station call of the system C: Sends to the
system A
0013 1 3 2 Special call: Sends to the system A
0014 2 7 2 Local call: Sends to the system A
0015 3 7 2
0016 4 7 2
0017 5 7 2
0018 6 7 2
0019 7 7 2
0020 8 7 2
0021 9 7 2
Program 712 Enter the Route Table for Auto Route Selection (MCP1)
Table Time Class Route Modify
01 1 1 803 -
02 1 1 803 001 Sends to the system A for outgoing
through trunk line
To Next Page
