OfficeServ 100 Installation Manual
© SAMSUNG Electronics Co., Ltd. 10-1
CHAPTER 10. Networking
Description and Programming
Procedure
This chapter provides networking description and programming procedure of OfficeServ
100 system.
10.1 Networking
This function allows you to operate multiple systems as if operating a single system.
Figure 10.1 OfficeServ 100 Networking Conceptual Diagram
The networking function of OfficeServ 100 system uses Q-SIG(Q Signaling), and is
classified into(TE)PRI Networking and VoIP Networking depending on the connection
method between each system.
OfficeServ 100 system using Q-SIG provides the functions below.
Digital phone Digital phone
Q-Sig
To Next Page
Loading...
