CHAPTER 10. Networking Description and Programming Procedure
10-18
© SAMSUNG Electronics Co., Ltd.
Index Digit Length LCRT
0018 6 7 4
0019 7 7 4
0020 8 7 4
0021 9 7 4
Program 712 Enter the Route Table for Auto Route Selection (MC1)
Table Time Class Route Modify
01 1 1 803 -
Sends the call through the 803 group at first.
- - 2 801 - Sends the call through the 801 group when
the 803 group is all used.
02 1 1 802 -
03 1 1 803 -
04 1 1 800 -
Program 601 Station Group (MCP1)
5000 Set Attendant Group
5049 Set SVMi Group
Program 825
ADD Number To Name Yes
Use Remote Voice Mail No
Remote CID Number Yes
10.3.2 System B Programming
Program 820 Set System Link Number (MCP1)
Index Link ID Signal G/W
SELF 092 168.219.110.110
SYS01 091 168.219.100.100
SYS02 093 -
SYS03 094 168.219.120.120
Program 821 Set Networking trunk line
Set TEPRI card connected with System A as Q-Signaling.
To Next Page
Loading...
