OfficeServ 100 Installation Manual/Ed.00
© SAMSUNG Electronics Co., Ltd. 10-19
Program 724 Change Dial Numbers (MCP1)
STN Dial Number Set the extension number as 2100~2399.
STNG Dial Number Set the extension group number as 5100~5179.
TRKG Dial Number Set 800 and 803.
FEAT Dial Number Set LCR as 9 To make trunk line call, dial 9 and the
target telephone number.
NTWK LCR Dial No IDX-01: 20
IDX-02: 24
IDX-03: 25
IDX-04: 26
IDX-05: 50
IDX-06: 52
IDX-07: 53
Program 824 Convert Auto Route Selection Expansion Dial
Index Phone No. Converted No. SZ Max DISP MB
01 20 09120 4 7 Y N
02 24 09324 4 7 Y N
03 25 09325 4 7 Y N
04 26 09426 4 7 Y N
05 50 09150 4 7 Y N
06 52 09352 4 7 Y N
07 53 09453 4 7 Y N
Program 714 Enter the Conversion Table of Dialing a Station Directly (MCP1)
Entry Digit MOH 1~6 CW Delete Name
001 2*** - B - 0 -
002 5*** - B - 0 -
Program 310 Set Auto Route Selection Class
Set LCR class of all stations as 2.
Program 603 trun5k line Group (MCP1)
800 Set PRI of TEPRI connected with System A through Networking
803 Set VoIP Networking Signaling trunk line
To Next Page
Loading...
