Samsung OfficeServ 100 - Page 112

CHAPTER 10. Networking Description and Programming Procedure
10-20 © SAMSUNG Electronics Co., Ltd.
Program 710 Enter a Digit for Auto Route Selection (MCP1)
Index Digit Length LCRT
0001 00 12 3
 International call: Sends to the system A.
0002 01 10 3
 Mobile call: Sends to the system A.
0003 02 9 3
 Long distance call: Sends to the system A.
0004 03 10 3
 Local call: Sends to the system A.
0005 04 10 3
0006 05 10 3
0007 06 10 3
0008 07 10 3
 070 call: Sends to the system A.
0009 08 10 3
 080 call: Sends to the system A.
0010 091 7 1
 The station call of the system A
0011 093 7 1  The station call of the system
C: Sends to the system A
0012 094 7 2
 The station call of the system D
0013 1 3 3
 Special call: Sends to the system A.
0014 2 7 3
 Local call: Sends to the system A.
0015 3 7 3
0016 4 7 3
0017 5 7 3
0018 6 7 3
0019 7 7 3
0020 8 7 3
0021 9 7 3
Program 712 Enter the Route Table for Auto Route Selection (MCP1)
Table Time Class Route Modify
01 1 1 803 -
- - 2 800 -
02 1 1 803 -
03 1 1 803 001  Sends to the system A for outgoing through
trunk line
- - 2 800 001