OfficeServ 100 Installation Manual/Ed.00
© SAMSUNG Electronics Co., Ltd. 10-21
Program 713 Enter a Dial Conversion Table for Auto Route Selection (MCP1)
Table Delete Insert Append
001 0 0919 - The first digit(9)-added number is sent to the
system A for outgoing through trunk line
Program 825
ADD Number To Name Yes
Use Remote Voice Mail Yes
Remote VM Number 5049
10.3.3 System C Programming
Program 820 Set System Link Number (MCP1)
Index Link ID Signal G/W
SELF 093 -
SYS01 091 168.219.100.100
SYS02 092 168.219.110.110
SYS03 094 168.219.120.120
Program 821 Set Networking trunk line
Set TEPRI card connected with System A as Q-Signaling
Program 724 Change Dial Numbers (MCP1)
STN Dial Number Set the extension number as 2400~2599
STNG Dial Number Set the extension group number as 5200~5279
TRKG Dial Number Set 800
FEAT Dial Number Set LCR as 9 To make trunk line call, dial 9 and the
target telephone number
NTWK LCR Dial No IDX-01: 20
IDX-02: 21
IDX-03: 22
IDX-04: 23
IDX-05: 26
IDX-06: 50
IDX-07: 51
IDX-08: 53
To Next Page
Loading...
