II.USERS
IM TEMI 770E_C 2nd Edition: Sep. 1. 2003. 24/40
■ INPUT_HUMI
Figure 5-6-3 HUMI INPUT
① SENSOR
: Select kinds of humi. sensor.
② HUMI RANGE
: Set the range of humi.
③ HUMI FILTER
:To remove the noise from the high-frequency of noise in the humi data.
④ BIAS
: Bias about the humidity.
⑤ SCALE (DCV ONLY)
: As DCV sensor type, set the scale for range.
(Table 5-8) INPUT_HUMI PARAMETER
Name Function Valid Range Unit Default Value
H.SENSOR HUMI SENSOR PT, DCV ABS PT
H.RH HUMI RANGE HIGH H.EU(0 ~ 100%) H.EU H.EU(100%)
H.RL HUMI RANGE LOW H.EU(0 ~ 100%) H.EU H.EU(0%)
H.BIAS HUMI BIAS H.EUS(-20 ~ 20%) H.EU H.EUS(0%)
H.FILTER HUMI FILTER 0 ~ 120S ABS 0
H.SCALE HUMI HIGH SCALE 0.1 ~ 100.0 % 100.0 (%)
L.SCALE HUMI LOW SCALE 0.0 ~ 99.9 % 0.0(%)
Figure 5-6-4 ADJUST INPUT
To Next Page
Loading...
