Santec MPM-210H - Page 40

MPM-210H OPERATION MANUAL
40 / 59
value1; Optical power of port 1
value2; Optical power of port 2
value3; Optical power of port 3
value4; Optical power of port 4
Example
READ?
Response: -20.123,-20.454,-20.764,-20.644
28. CWAV?
Description
Check the wavelength that should be calibrated.
Unit: nm
Refer to the 5.5.6 for the method of wavelength
compensation.
Syntax
CWAV?<wsp><module>,<index>
Parameter
<module>
Module Number: 0,1,2,3,4
<index>
Index : Wavelength set order that would be applied –
Integer 1,2,3~ 18,19,20
Response
<value>
Wavelength
Unit: nm
Example
CWAV? 0,1
Response: 1250
29. CWAVPO?
Description
Power calibration value of the wavelength of “CWAV?”
command Index.
Unit: dB
Refer to the 5.5.6 for the method of wavelength
compensation.
Syntax
CWAVPO?<wsp><module>,<ch>,<index>
Parameter
<module>
Module Number: 0,1,2,3,4 - Integer
<ch>
Port number: 1,2,3,4 - Integer
<index>