Sanyo PLC-XP200L Service Manual

A1
KR7-XP200L00
Schematic Diagrams
Printed Wiring Board Drawings
Model Chassis No.
PLC-XP200L KR7-XP200L00
Diagrams & Drawings
These schematic diagrams and printed wiring board drawings are part of the
service manual original for chassis No. KR7-XP200L00 model PLC-XP200L.
File with the service manual No. SM5111003-00
Note:
All the information of part numbers and values indicated on these diagrams are at the
beginning of production. To improve the performance, there may be some differences to
the actual set. When you order the service parts, use service parts code mentioned on the
parts list in this service manual.

Sanyo PLC-XP200L Specifications

General

Vertical scan range	48 - 100 Hz
Horizontal scan range	15 - 100 kHz
Projection technology	LCD
Projector native resolution	XGA (1024x768)
Keystone correction, vertical	±40 °
Lamp type	NSH
Lamp power	330 W
Light source type	Lamp
Service life of light source	2000 h
Service life of light source (economic mode)	3000 h
Bundled software	User Manual (CD ROM)
I/O ports	DVI-D (digital/HDCP) D-Sub15 (RGB/SCART-RGB) 5 x BNC (RGBHV/Composite/Y-Pb/Cb-Pr/Cr) 3 x RCA (Video/Y-Pb/Cb-Pr/Cr) Mini DIN 4 (S-Video) 3.5 mm Stereo Jack D-Sub15 D-Sub9 (RS232) 3.5 mm Stereo Jack (cable remote control) USB type B
Compatibility	UXGA SXGA SXGA+ WXGA XGA S-VGA VGA Mac
Dimensions (WxDxH)	370 x 440 x 187 mm
Power requirements	100 - 240 V
Power consumption (standby)	24.5 W
Power consumption (typical)	499 W
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	5 - 40 °C
Placement	Ceiling

Weight and Dimensions

Weight	11400 g
Package weight	15900 g