Sartorius Combics 2 CAIXS2 - Menu Structure; Overview of the complete menu structure

124 Operating Instructions Combics CAIXS2
Menu Structure
Menu Structure
Overview of the complete menu structure; the individual setting parameters are listed on the following pages.
The indicator only displays the menus that correspond to the available hardware.
APPLIC. Set and select applications (see page 137)
- APPLIC.1 Basic weighing function, Counting applications z , Neutral measurement znM, Animal weighing j,
Weighing in percent %
- APPLIC.2 Checkweighing
+
/
-
, Classification
W applications
- APPLIC.3 Net-total formulation R , Totalizing s applications
- AUT.TARE Automatic taring: 1. weight tared
- MIN.TARE Minimum load for automatic tare and printout
- AUT.STRT Automatic start of application
- CLER.CF Selective deleting with the C key
- TARE.FCT Tare function
- RESET Factory settings for all applications
FN-KEY Defines functions of the k key (see page 141)
- off
- 2ND.UNIT
SETUP Adjusts device settings to user requirements (see page 141)
- WP1 Settings for weighing platform 1
- COM1 Settings for the RS-232 interface
- CTRL IO Universal input setting
- PRINT Printout settings
- UTILIT. Settings for additional functions
- TIME Time setting
- DATE Date setting
- U-CODE User password entry for locking the Setup menu
- S-DATE only visible in Service mode; applications
- SER.NO. only visible in Service mode; serial number
- MODEL only visible in Service mode; serial number
- S-SQMIN only visible in Service mode;
- SQMIN Activates display or GMP-compliant printout
- ALIB.MEM
INFO Displays device-specific information (see page 151)
- SERVICE Service date
- TERM Indicator serial number
- WP-1 Weighing platform 1 device data
- WP-2 Weighing platform 2 device data
- FLEXINF FlexPrint settings
- ALIB.MEM Alibi memory settings
LANGUAG. Language setting for display and printout (see page 151)
- DEUTSCH
- ENGLISH
- US.MODE
- FRANC
- ITAL
- ESPANOL
- CODES
ADC.CON ADC configuration settings (see page 152)
- VERIF.
- STANDARD