Sartorius Combics 2 CAIXS2 - Setting Up Password Protection

20 Operating Instructions Combics CAIXS2
Operating Design
y The small circle indicates that the setting has been saved.
( Use the ( key to exit the menu level to make additional settings if required.
or
) Press the ) key longer than 2 seconds to exit the menu.
Setting Up Password Protection
e t Turn on the device.
t While all segments are lit, press the ( key briefly.
y The first item in the main menu is shown: APPLIC.
k k ... t Press the k key until the SETUP menu item is displayed.
) t Press the ) key to open the Setup sub-menu.
y The first parameter in the Setup sub-menu is displayed: WP-1.
k k ... t Press the k key until BEN.-CODE is displayed.
) t Press the ) key to open the menu item.
y The position for the first character to be entered flashes.
p k t Use the p and k keys to select the desired character.
p starts the character selection with A alphabetically and
k starts the character selection with 0 and counts upward.
Alternatively, enter a number value using the 10-key numeric keypad directly.
°