Sartorius Combics 2 CAIXS2 - Net Total Formulation R; Features; Printout

86 Operating Instructions Combics CAIXS2
Operation
Net Total Formulation R
With this application, you can weigh in different components up to a defined total.
Each component is saved in the net-total memory (Applic.3 menu).
Features – Weigh in up to 999 components in series.
– Net total formulation cannot be combined with level 1 and 2 applications
(Applic.1, Applic.2).
– Current component number displayed in the number line (indicating the
component to be added).
– Toggle the display from “component mode” to “additive mode” by pressing
the w key.
– Component mode: Display the weight of the component currently on the
platform (for 1 second after it is saved; then the platform is tared).
– Additive mode: Display the weight of all components on the platform (after
it is saved, the net weight of the last component added is displayed briefly).
– Toggle to a second weighing platform while weighing in.
– Activate Info mode with the I key.
– Automatic component printout when it is saved.
Setting: Applic./Applic.3/NET TOT menu item 3.17.
Printout If the 3.17.2 menu item is selected, the entire component record is printed. If the
3.17.3 menu item is selected, the following items are generated only for the first
component if it has been configured:
Blank line, dash line, date/time, time, ID1 ... ID6, header lines 1 and 2. For
subsequent components, each “component” item (“Comp xx”) is followed by
a blank line.
– Automatic taring of container weight.
Setting: Applic. / aut.tare menu item 3.7.
– Restore factory default settings.
Setting: Applic. / Reset menu item 9.1.
Preparation t Open the APPLIC./APPLIC.3/Net.tot.menu.
Available parameter settings * = Factory setting
MIN.INIT Minimum load for initialization 3.6
1 digit 1 scale interval 3.6.1*
2 digit 2 scale intervals 3.6.2
5 digit 5 scale intervals 3.6.3
10 dig. 10 scale intervals 3.6.4
20 dig. 20 scale intervals 3.6.5
50 dig. 50 scale intervals 3.6.6
100 dig. 100 scale intervals 3.6.7
200 dig. 200 scale intervals 3.6.8
500 dig. 500 scale intervals 3.6.9
1000 d 1000 scale intervals 3.6.10
PRT.SAV. Individual/Component printout when saved 3.17
OFF Automatic printing off 3.17.1
EACH.TIM. Print the entire standard print
configuration every time the
O key is pressed 3.17.2*
ONCE Print the entire standard print
configuration once with the O key 3.17.3