48 Operating Instructions Combics CAIXS2
Operation
Individual ID Codes (Identifiers)
You can assign codes (such as product name, batch number, etc.) for identification
of measured values on printouts.
Features – You can assign up to six ID codes.
– One name and one value can be assigned to each ID code.
– Displaying individual IDs: press the d key.
– The name is left-justified and the value is right-justified on the printout.
If the entire code is too long for one line, additional lines are printed.
– Enter ID code names in the Setup menu under
SETUP / PRTPROT , menu item 7.4.
The name can have a max. of 20 characters.
– Enter up to 40 characters for the value of the ID code. Press the d key to
activate the input mode.
– Individual characters of the ID can be deleted using the c key.
– If both the name and value fields are empty, no ID code is printed.
– In the Setup menu, you can configure when and whether ID codes are printed
(see “Configuring Printouts" page 96).
Settings for Individual ID Codes
Menu: SETUP/PRINT/PROTOC./ /header
Factory settings for ID code names:
ID1: ID1
ID2: ID2
ID3: ID3
ID4: ID4
ID5: ID5
ID6: ID6
There are no factory settings for ID code values.
To Next Page
Loading...