Operating Instructions Combics CAIXS2 17
Operating Design
17 Symbols for applications: An active application is identified by a line above and
below the symbol (
13
4
5
6
7
8
9
10
11
12131415
16
17
18
19
20
Appl. 1 Appl. 2 Appl. 3
2
).
Application 1: A “Counting"/ “Neutral Measurement"
B “Weighing in percent"
V “Averaging" (animal weighing)
Application 2: H “Checkweighing"
W “Classification"
Y “Checkweighing toward zero"
Manually batching toward “zero"
Application 3: L “Totalizing"
M “Net total formulation"
18
U
The zero-setting symbol is displayed after the active scale or weighing
platform has been zeroed (verified models only)
19 + – Plus or minus sign of the value displayed
20
l
Busy symbol indicates that an internal process is in progress
Menu Operating Concept
Switching to the Menu
e t Turn on the device.
If it is already on: turn off and then on again.
)
t During the display test, briefly press the ) key.
y The menu will open. The top most level is always displayed (APPL, ); for menu
structure see page 136.
Navigating the Menu
You can navigate the menu using the keys with the white arrows under them.
( Back to the superordinate menu level
k Access the next menu item on the same level
This continues to page through on the same level
) Press less than 2 seconds: Select the menu item and save
Press longer than 2 seconds: Exit the menu and switch to weighing mode
p Print the menu settings starting from the current position, or print Info data
To Next Page
Loading...