Sartorius Combics 2 CAIXS2 - Product Data Memory; Saving Product Data; Displaying Information for a Specific Product or Tare Value; Displaying Information for all Product or Tare Memories

Operating Instructions Combics CAIXS2 97
Operation
Product Data Memory
Purpose The product data memory stores initialization data and user data (product and tare
values).
Features – The product data memory has 100 memory cells for product or tare values. This
means that e.g. 80 application memories and 20 tare memories are available.
– Each memory cell is uniquely identified by a number up to three digits.
– The product data memory can be used with the following applications:
Application 1 Application 2
– Weighing – Checkweighing
– Counting – Classification
– Neutral measurement
– Animal weighing
– Weighing in percent
– Data records can be created, overwritten, and individually deleted.
– Data remains stored when the scale is switched off.
Saving Product Data (in this example in the “Counting" application)
t Start the Counting application.
t Enter a memory number and press and hold the R key (min 2 seconds).
Saving Preset Tare Values
t Allocate preset tare memory.
t Enter a memory number and press and hold the t key (min 2 seconds).
Activating Saved Product or Tare Values
t Enter a memory number and press the R key.
Displaying Information for a Specific Product or Tare Value
T Enter a memory number and press the I key.
– Use the k key to switch between wRef (average piece weight) and nRef
(quantity).
– Use the ) key to scroll the displayed value to the right.
– Use the R key to activate the displayed memory.
– Use the c key (min. 2 seconds) to delete the displayed memory.
t Exit the mode using the c key.
Displaying Information for all Product or Tare Memories
t Press the R key to display the first memory number.
– Press the k key to scroll through in lexical order (e.g. 1, 3, 333, 4, etc.).
– Use the R key to activate the selected memory number.
– Press the I key to display the saved product values.
– Press and hold the c key (min. 2 seconds) to delete the selected memory
number.
t Exit the mode using the c key.
Deleting Specific Memory Numbers
t Enter a memory number and press and hold the c key.