Sartorius Combics 2 CAIXS2 - Configuring Weighing Platforms

Operating Instructions Combics CAIXS2 23
Configuring Weighing Platforms
Activating the Service Mode
e ... ) t Switch to the Menu mode.
k k ... t Access the Setup menu.
) t Select Setup.
If a password is requested at this point, enter the service password
(see Appendix) and continue with “Saving the service password."
k k ... t Access menu item U-CODE.
) t Select ben.Code.
t Enter the service password (see Appendix).
) t Apply the service password.
y The Service mode is active: an “S" appears in the top right-hand corner of the
display.
( ( t Return to Setup in the Service mode.