Operating Instructions Combics CAIXS2 19
Operating Design
Configurations
Basic settings are made in the Menu mode by selecting the desired parameters.
These are divided into the following groups (first menu level); for menu structure
see page 136:
– Application parameter APPLIC.
– Function key fn-key
– Device parameter SETUP
– Device-specific information Info
– User language LANGUAG.
When used in legal metrology, not all parameters can be accessed. Only those
parameters that can be selected are displayed. Factory-set parameters are identified
by an “*" in the list starting on page 137.
Printing Parameter Settings
t Access the Menu mode (see page 35).
t Press the p key.
The scope of the printout depends on the position in the setup. It may take several
seconds.
Language Settings
Example: Select the language “German." The factory setting for language is
“English."
Menu: appl / LANG .
e t Turn on the device.
t While all segments are lit, press the ( key briefly.
y The first item in the main menu is shown: APPL.
k k ... t Press the k key until the LANGuag. menu item is displayed for the language
setting.
) t Press the ) key to access the language setting sub-menu.
y The currently set language is displayed.
k k ... t Press the k key until GERMAN is displayed.
) t Press the ) key to save the selection.
uag.
To Next Page
Loading...