6 Operating Instructions Combics CAIXS2
General View of the Equipment
CAIXS2 2
1
Display (for details, see “Operating Design" chapter)
2
On/Standby switch
3
General function keys: Zero, Tare, Switch function, Adjustment/
Calibration, Print/Data output
(see “Operating Design")
4
10 digit keypad for entering values
5
Additional function keys (see “Operating Design")
Rear View
8
WP weighing platform connection
9
Connection options for COM1
10
Adapter cable with plug for EX power supply
11 Equipotential bonding conductor
12
Input for menu access switch (standard or legal-for-trade mode)
13
Vent valve
Order no. Price in €
CAIXS2
1.500
Preconfiguration with platform series CAPXS, IU, IF; verification by the manufacturer; calibration for the place of use;
mounting optional dataoutputs;
removable connection between terminal and platform can be ordered under VF2829. Please ask your sales representative.
• Networking of up to 8 indicators
• Suitable for: mounting on a bench, attaching to floor stand or columns,
mounting on a wall or installation in a switch cabinet
Description
Combics 2 Ex-Indicator
Stainless steel housing with cable glance.
Selectable is an A/D converter or digital interface to connect one scale in total.
Standard: 1 selectable data interface RS 232/485/422
Pre-assembled adapter cable for power supply modules.
The power supply for CAIXS2 is not included in the equipment supplied (see accessories).
Explosion protected scales for hazardous areas - Combics Ex-Indicator CAIXS2
• For use in Zones 1 (explosive gases) and Zone 21 (explosive dusts)
• ATEX: II 2G Ex ia IIC T4 Gb
II 2D Ex ia IIIC T80°C Db
• Allows the connection of one analogue Sartorius platforms Combics-Ex,
IFXS4, IUXS4, or one IS-X precision platforms, Signum Ex scale or load
cells with suitable specifications to be connected in Zone 1, 21, 20
• Verifiable class III, IIII
• Very easy to read display
1
2
3
4
5
8
9
10
11
12
13
To Next Page
Loading...