60 Operating Instructions Combics CAIXS2
Operation
Averaging (Animal Weighing) V
With this application, you can calculate averages from several weighing operations.
It is used when either the object to be weighed (e.g. animals) or the environment
during weighing are unstable. Selection and settings in the Applic. / Applic.1 /
ANIM.WG menu.
Features – Averaging started manually or automatically (... /start menu item 3.18).
With manual start selected, the averaging routine begins when you press a key
(provided the start conditions are met).
With automatic start selected, the application begins when you place the first
load on the platform (provided the start conditions are met).
– Enter the number of subweighing operations using the keypad.
– Use the r key to select the number of measurements for averaging.
– Activate Info mode with the I key.
– Toggle the display between “result of last measurement” and “current weight”
by pressing the w key.
– Automatic printout of results (... /PRINT menu item 3.20).
– Automatic taring of container weight (APPLIC./aut.tare menu item 3.7).
– Automatic start of averaging when the scale is turned on and a sample placed
on the platform, provided start conditions are met (APPLIC./aut.Strt menu
item 3.8).
Exit Application, Delete Parameters
The value of the reference sample weight in the reference memory remains active
until it is deleted using the c key, or is overwritten, or until the application is
changed. The reference sample weight also remains saved after the scale is turned
off.
You can assign different functions to the c to delete applications. When you
clear applications, you can delete either the data stored for all applications or just
selected data stored for the active application.
Setting: APPLIC/CLER.CF menu item 3.24.
Tare Function:
If you store a tare (weight value) by pressing the ) key, you can later enter a tare
value manually. The tare value you enter is added to the stored tare value.
Setting: APPLIC./TARE.FNC menu item 3.25.1 (factory setting).
A tare value entered manually overwrites a stored tare value (weight value). If you
enter a tare value manually, a tare value (weight value) stored later overwrites the
manually entered value.
Setting: Applic./TARE.FNC menu item 3.25.2.
Restore factory default settings: Applic./Reset menu item 9.1.
Number of measurements for averaging You can enter the desired number of weight measurements to determine the
average using the keypad. This value remains active until it is overwritten by
another value. It also remains in memory when you switch to a different application
program, or turn off the scale.
Start application There are three ways to start the averaging routine:
– Manual start with preset number of subweighing operations: Place the sample
on the platform and press the O key.
To Next Page
Loading...