Sartorius Combics 2 CAIXS2 - Combining Application Programs; Example: “Portioning (counting z, checkweighing O with totalizing s)

90 Operating Instructions Combics CAIXS2
Operation
Combining Application Programs
The following table shows how the applications described can be combined. The
basic weighing function is available at all times; it does not need to be combined
with a computational function.
Select programs one after the other: Toggle using the D key.
Application 1 Application 2 Application 3
(Basic Function) (Monitoring Function) (Cumulative-value Function)
Counting – Totalizing
Counting Checkweighing Totalizing
Counting Checkweighing –
Counting Classification –
Neutral measurement – Totalizing
Neutral measurement Checkweighing Totalizing
Neutral measurement Checkweighing –
Neutral measurement Classification –
Animal weighing – Totalizing
Animal weighing Checkweighing Totalizing
Animal weighing Checkweighing –
Animal weighing Classification –
Weighing in percent – Totalizing
Weighing in percent Checkweighing Totalizing
Weighing in percent Checkweighing –
Weighing in percent Classification –
– – Net-total formulation
– Checkweighing Totalizing
Example: “Portioning" (counting z, checkweighing O with totalizing s)
Configuration:
Application 1: Counting (COUNT.)
Application 2: Checkweighing (CHECK.)
Application 3: Totalizing (TOTALIZ): Saved value: Net + Calculated (3.23.3)
Autosave: On (3.16.2)
Source of data: Application 2 (3.22.2)
Setup: Printout: PRT PROT 7.8. Printer 1: “Total: Print when FN pressed,” then
select the menu line items of your choice.
t Place empty container on the scale.
) t Tare scale.
This is not required if the automatic tare function is active. The tare weight is
saved automatically when you place the container on the platform.