18 Operating Instructions Combics CAIXS2
Operating Design
Entering Numbers and Letters (without a Number Block)
( – Press the key for less than 2 seconds: Activate character to the left of the
currently active character (when first character is active: exit the input
mode without saving changes)
– Press the key for longer than 2 seconds: Exit the input mode without
saving changes
( – Press the key for less than 2 seconds:
Confirm currently active character and move 1 position to the right (after
the last character: save input)
– Press key for longer than 2 seconds: Save current input and display the
menu item
k – Cursor in first position, no characters entered yet: Delete character(s) and
enter 0
– Change the displayed character; scroll forward (sequence: 0 ... 9, decimal
point, minus sign, Z _ A, space)
p – Cursor in first position, no characters entered yet: Delete character(s) and
enter a space
–
Change the displayed character; scroll backward (sequence:
space, A _ Z, minus sign, decimal point, 9 _ 0)
Enter number values (date and time, etc.) using the 10-key numeric keypad.
Menu Display
Both illustrations depict all of the main display elements and symbols that can be
shown in Menu mode.
1 Selected menu item (e.g. printer for setting the connected printer)
2 Menu history (note at highest menu level in the Setup menu)
3 Note that other submenus are available
Display with the “codes" language setting
4 First level in the Setup menu
5 Second level in the Setup menu
6 Third level in the Setup menu
7 Currently active setting
Saving Menu Settings
The parameters selected in the menu remain saved when you switch to weighing
mode or turn off the device. You can block access to the Setup menu by requiring
a password to prevent unauthorized or accidental setting changes.
1
3
2
2
3
4 5 6 7
To Next Page
Loading...