Operating Instructions Combics CAIXS2 57
Operation
How the reference weight is calculated depends on the application setting for
resolution. The resolution settings are either display resolution, display resolution
10-fold or display resolution 100-fold.
Entering the Reference Weight
The reference weight (e.g. the weight of one meter of electrical cable) can be
entered using the keypad and saved by pressing the O key.
h
The entered value remains active until deleted by pressing the c key or
overwritten by a new value. It remains saved after the scale is switched off.
Preparation t Open the APPLIC./APPLIC.1/Neutr.M. menu.
Available parameter settings * = Factory setting
MIN.INIT Minimum load for initialization 3.6
1 digit 1 scale interval 3.6.1*
2 digit 2 scale intervals 3.6.2
5 digit 5 scale intervals 3.6.3
10 dig. 10 scale intervals 3.6.4
20 dig. 20 scale intervals 3.6.5
50 dig. 50 scale intervals 3.6.6
100 dig. 100 scale intervals 3.6.7
200 dig. 200 scale intervals 3.6.8
500 dig. 500 scale intervals 3.6.9
1000 d 1000 scale intervals 3.6.10
RESOLUT Resolution for calculation of reference value 3.9
Disp.acc. Display accuracy 3.9.1*
10 FOLD Display accuracy + 1 decimal place 3.9.2
100 FOLD Display accuracy + 2 decimal places 3.9.3
Dec.plcs Decimal places in displayed result 3.10
without none 3.10.1*
1 Dec.Pl. 1 decimal place 3.10.2
2 Dec.Pl. 2 decimal places 3.10.3
3 Dec.Pl. 3 decimal places 3.10.4
SAVE WT.Parameter for saving weight values 3.11
STABL. With stability 3.11.1*
ACC.STAB With increased stability 3.11.2
REF.WP Reference weighing instrument 3.13
NO WP No weighing platform selected 3.13.1*
WP 1 Weighing platform WP1 3.13.2
WP 2 Weighing platform WP2 3.13.3
) t To save the setting, press the ) key.
( ( ... t To exit setup: Press the ( key several times.
To Next Page
Loading...