Sartorius Combics 2 CAIXS2 - Page 94

94 Operating Instructions Combics CAIXS2
Operation
TOTAL 2 Result interface 2 7.12
gmp.prot ISO/GMP 7.13
DAT/TIM Date without time 7.14
AUT.ONCE Automatic printout after stability 7.15
FLEX. PRN Flex print 7.16
DEC.SEP. Decimal separator 7.17
ALIB.MEM Alibi memory 7.18
RESET Restore factory default settings 9
Setting the factory settings 9.1
– The rows of the printout list can be called up and activated individually.
Example: see under Configuration, menu item 7.6.
– The print selection set as active appears with the left selection bar on the
display, e.g. gross, tare, net.
t Expand the printout: Press the ) key. The selection bar appears on the right
of the display.
t Select print items: Press the k key.
t Save the desired print items: Press the ) key.
t Press the ( key to change the print selection set as active. The selection bar
appears on the left. The required print item is set as active and appears in the
printout.
– Print items can be deleted individually from the active printout selection:
Press and hold the ( key.
t Save settings with the ) key and exit Setup: Press the ( key several times.
Additional functions Printing the “Selection" and “List" Settings
LIST: Output of the current printout list
SELECT: Print currently selectable items
t When the selection bar is in LIST or SELECT: Press the p key.
Printout (example) Indiv.Prt
List
====================
Net (N)
Gross (G#)
Tare
Tare (T2/PT2)
Piece count
====================
etc.