344
[ESC+~B] Eject and Cut
ESC ~B ParameterHexadecimal code
<1B>
16
<7E>
16
<42>
16
Nil
Initial value Nil
When the power is OFF The set command is not maintained.
Valid range within items The set command becomes invalid.
Valid range and term of
command
Valid range between
items
The set command becomes invalid.
[Function]
Specifies eject and cut operation.
[Format]
<~B>
[Coding Example]
<A>
<~B>
<Z>
(1) Label stop position
A: Printed
B: Not printed
C: Not printed
D: Not printed
(2) Command received
(3) Label is fed to the cut position.
(4) Label is cut off.
(5) Label is back fed to the print position.
A B C
Cut position Head
A
B C
D
B C D
B C D
(1)
(3)
(4)
(5)
(2)
Feed direction
[Supplementary Explanation]
• Valid only for cutter models.
• This command is used to cut the last label remaining in the printer.
• This command <~B> should be used by differentiating between Start code <A> and Stop code
<Z>.
• This command <~B> may not be used in combination with other commands.
• This command <~B> is valid when the printer still holds the label which is not cut after being
printed.