SATO CL4NX Programming Reference

730
I/O signal
1) Input signal
2) Output signal
3) Output waiting for dispenser
Parent topic External signal interface
1) Input signal
Item
Input wave form
Print
1
2
3
4
20ms
1
st
label printed
(PREND)
P
rint end
Print start
(PRIN)
Reprint
(PRIN2)
Print
1
st
label printed
Print start
(PRIN)
Reprint
(PRIN2)
1
2
3
4
(PREND)
Print end
Reprint
Without print start signal
Prin
t
1
st
Label printed
Print start
Reprint
(PRIN2)
1
2
3
4
20ms
(PREND)
Print end
Reprint
With reprint signal
20ms
10ms
<
=
Print start
[Notes]
• Keep “Low” for print start signal (PRIN) until print end signal (PREND) is output. *(Refer to
the following “Keeping print start signal (PRIN)” table.) Make sure to output 10 ms or more for
reprint signal (PRIN2). Printer won’t reprint if reprint signal cannot be detected from 10 ms and
under.
• If NULL cut specified not output print end signal (PREND).

SATO CL4NX Specifications

General

Wi-Fi	No
Ethernet LAN	Yes
Flash memory	2000 MB
Storage media	Flash
Internal memory	256 MB
Built-in barcodes	Code 39, Code 93, Code-128 Codabar Library, EAN13, EAN8, GS1 DataBar, Industrial 2/5, Interleaved 2/5, Matrix 2/5
Internal storage capacity	2 GB
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	30 - 90 %
Operating relative humidity (H-H)	30 - 80 %
Maximum roll diameter	220 mm
Maximum printing width	104 mm
Printing media thickness	0.06 - 0.26 µm
Display type	LCD
Product color	Black
Display diagonal	3.5 \
Display resolution	320 x 240 pixels
AC input voltage	100 - 240 V
Power source type	AC
AC input frequency	50 - 60 Hz
USB connector	USB Type-A / USB Type-B
Bluetooth version	3.0
Serial interface type	RS-232C
USB 2.0 ports quantity	2
Connectivity technology	Wired & Wireless
Type	POS printer
Print speed	10 ips
Print technology	Direct thermal / Thermal transfer
Maximum resolution	203 x 203 DPI

Weight and Dimensions

Depth	457 mm
Width	271 mm
Height	321 mm
Weight	15000 g