SATO CL4NX Programming Reference

724
In case where communication is lost while transferring status after
receiving print data
CRC check is enabled (Common in status 3 and status 4)
Receiving/Analysis/Editing
ID number=[12]
Print Qty=50
Job name=[SATO]
CONNECT
Print command (STX to ETX CRC)
Print
ACK
ＸＸ
Disconnection
or communication failure
HOST
This product
Note
• When ACK is not returned after sending print data, it shall be regarded as communication failure
and sending print data has to be stopped.
• ACK may not return when communication through Bluetooth is disconnected before this product
returns ACK.
CRC check is disabled (Common in status3 and status 4)
Works the same as the previously mentioned "CRC check enabled".
Parent topic Transmission sequence

SATO CL4NX Specifications

General

Wi-Fi	No
Ethernet LAN	Yes
Flash memory	2000 MB
Storage media	Flash
Internal memory	256 MB
Built-in barcodes	Code 39, Code 93, Code-128 Codabar Library, EAN13, EAN8, GS1 DataBar, Industrial 2/5, Interleaved 2/5, Matrix 2/5
Internal storage capacity	2 GB
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	30 - 90 %
Operating relative humidity (H-H)	30 - 80 %
Maximum roll diameter	220 mm
Maximum printing width	104 mm
Printing media thickness	0.06 - 0.26 µm
Display type	LCD
Product color	Black
Display diagonal	3.5 \
Display resolution	320 x 240 pixels
AC input voltage	100 - 240 V
Power source type	AC
AC input frequency	50 - 60 Hz
USB connector	USB Type-A / USB Type-B
Bluetooth version	3.0
Serial interface type	RS-232C
USB 2.0 ports quantity	2
Connectivity technology	Wired & Wireless
Type	POS printer
Print speed	10 ips
Print technology	Direct thermal / Thermal transfer
Maximum resolution	203 x 203 DPI

Weight and Dimensions

Depth	457 mm
Width	271 mm
Height	321 mm
Weight	15000 g