EasyManuals Logo

SATO CL4NX Programming Reference

SATO CL4NX
756 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #355 background imageLoading...
Page #355 background image
353
[ESC+IG] Sensor Type
ESC IG ParameterHexadecimal code
<1B>
16
<49>
16
<47>
16
a
Initial value a=1
When the power is OFF The set parameter is maintained.
Valid range within items The set parameter is valid until the next valid setting.
Valid range and term of
command
Valid range between items The set parameter is valid until the next valid setting.
[Function]
Specifies the sensor type.
[Format]
<IG>a
Parameter
a [Sensor type]
     
0
 
:
 
Reflective (I-mark)
     
1
 
:
 
Transmissive (Gap)
     
2
 
:
 
Sensor disabled
[Coding Example]
<A>
<IG>1
<Z>
[Supplementary Explanation]
The setting by this command is normally not needed.
The set parameter is maintained after turning off the printer.
Do not use this command while printing operation as sensor may not work properly.
Receiving print command after changing the sensor type executes printing after backfeed
except specifying the "ignore sensor" to the sensor type. Feed motion is not performed after
turning the printer's power off and then power on.
Command error occurs when setting printer operation mode to [Tear-Off] and [Dispenser] and
specifying sensor type to 2 (Ignore sensor).
When printer operation mode is set to [Linerless cutter], the range will be available only in
0: Reflective sensor (I-MARK) and 2: Ignore sensor. When 1: Transmissive sensor (GAP) is
specified, there will be no command error. In this case, no value will be set.
Parent topic System Command

Table of Contents

Other manuals for SATO CL4NX

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the SATO CL4NX and is the answer not in the manual?

SATO CL4NX Specifications

General IconGeneral
Wi-FiNo
Ethernet LANYes
Flash memory2000 MB
Storage mediaFlash
Internal memory256 MB
Built-in barcodesCode 39, Code 93, Code-128 Codabar Library, EAN13, EAN8, GS1 DataBar, Industrial 2/5, Interleaved 2/5, Matrix 2/5
Internal storage capacity2 GB
Storage temperature (T-T)-20 - 60 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)30 - 90 %
Operating relative humidity (H-H)30 - 80 %
Maximum roll diameter220 mm
Maximum printing width104 mm
Printing media thickness0.06 - 0.26 µm
Display typeLCD
Product colorBlack
Display diagonal3.5 \
Display resolution320 x 240 pixels
AC input voltage100 - 240 V
Power source typeAC
AC input frequency50 - 60 Hz
USB connectorUSB Type-A / USB Type-B
Bluetooth version3.0
Serial interface typeRS-232C
USB 2.0 ports quantity2
Connectivity technologyWired & Wireless
TypePOS printer
Print speed10 ips
Print technologyDirect thermal / Thermal transfer
Maximum resolution203 x 203 DPI
Weight and Dimensions IconWeight and Dimensions
Depth457 mm
Width271 mm
Height321 mm
Weight15000 g

Related product manuals