SATO CL4NX Programming Reference

520
Common commands for all languages
The common commands are the commands independent from the applications such as SBPL,
SZPL, SIPL.
The common specifications of the common command for all languages will be described as follows.
• The structure begins from [DC2]<12>
16
and two characters follow it.
• When the two characters follow [DC2] are not the common commands, nothing will be returned
and the data after that will be ignored.
• The command to specify the data size will wait the data until the data size satisfies the specified
size and no data will be returned.
• When initializing the printer, turning the printer's power off and updating the printer, [NAK]<15>
16
will be returned. However, the cancel request command can be received.
• It runs after resuming from power-save mode when the printer is in power-saving mode or
resuming from power-save mode, and returns [ACK]<06>
16
or [NAK]<15>
16
. However, the reset
command and the power off command and the cancel request command can be received.
• The common commands cannot be used when the printer is set to the non-standard mode.
[DC2+PA] Printer setting command
[DC2+PB] Printer setting information acquisition
[DC2+PC] Printer device information acquisition
[DC2+PD] Each sensor information acquisition
[DC2+PG] Printer status information acquisition
[DC2+PH] Cancel request
[DC2+PI] Application change
[DC2+PJ] EPC code read (UHF M6e) (CL4NX Only)
[DC2+PK] EPC/TID return request (UHF M6e) (CL4NX Only)
[DC2+PJ] RFID read (ISO/IEC15693) (CL4NX Only)
[DC2+PK] UID return request (ISO/IEC15693) (CL4NX Only)
[DC2+PJ] RFID read (ISO/IEC14443 TypeA) (CL4NX Only)
[DC2+PK] UID return request (ISO/IEC14443 TypeA) (CL4NX Only)
[DC2+PJ] RFID read (FeliCa) (CL4NX Only)
[DC2+PK] IDm return (FeliCa) (CL4NX Only)
[DC2+PN] Request to return label pitch size
[DC2+DB] Initialization
[DC2+DC] Reset
[DC2+DD] Power OFF
[DC2+DE] File download
[DC2+DF] File name information acquisition
[DC2+DG] File information acquisition
[DC2+DH] File deletion
Parent topic Part 1 SBPL Commands

SATO CL4NX Specifications

General

Wi-Fi	No
Ethernet LAN	Yes
Flash memory	2000 MB
Storage media	Flash
Internal memory	256 MB
Built-in barcodes	Code 39, Code 93, Code-128 Codabar Library, EAN13, EAN8, GS1 DataBar, Industrial 2/5, Interleaved 2/5, Matrix 2/5
Internal storage capacity	2 GB
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	30 - 90 %
Operating relative humidity (H-H)	30 - 80 %
Maximum roll diameter	220 mm
Maximum printing width	104 mm
Printing media thickness	0.06 - 0.26 µm
Display type	LCD
Product color	Black
Display diagonal	3.5 \
Display resolution	320 x 240 pixels
AC input voltage	100 - 240 V
Power source type	AC
AC input frequency	50 - 60 Hz
USB connector	USB Type-A / USB Type-B
Bluetooth version	3.0
Serial interface type	RS-232C
USB 2.0 ports quantity	2
Connectivity technology	Wired & Wireless
Type	POS printer
Print speed	10 ips
Print technology	Direct thermal / Thermal transfer
Maximum resolution	203 x 203 DPI

Weight and Dimensions

Depth	457 mm
Width	271 mm
Height	321 mm
Weight	15000 g