2 Operation and Configuration
18
S84-ex/S86-ex Service Manual
RFID Freq Band
This screen allows user to set the RFID frequency band from the following
six regions:
Note
This screen shows only if you have selected ENABLE in the RFID
MODULE menu.
INVENTORY CHECK
User can set whether or not to perform the inventory check of the RFID
tags and to set the timeout for checking.
• ENABLE: Perform the inventory check of the RFID tags. The printer
checks the taken tag number before writing to/read from the tag. An
error occurs when the number is other than one.
• DISABLE: Do not perform the inventory check of the RFID tags.
The timeout can be set from 25, 50, 75, 100, 150, 200, 300 and 500 ms.
Note
This screen shows only if you have selected ENABLE in the RFID
MODULE menu.
Region Frequency
North America 902,000 to 928,000 kHz
Europe 865,600 to 867,600 kHz
China 920,625 to 924,375 kHz
Korea 917,000 to 923,500 kHz
Australia 918,750 to 925,250 kHz
Singapore 866,300 to 867,500 kHz
To Next Page
Loading...
